UV Curing Machine for Trademark Printing and Drying

• Lamp Parameters: 6kw380V*1PC
• Effective Illumination Width: 550mm
• UV Lamp Height: 50~120mm(Adjustable)
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LDUVJ-1D-6KW
• Power Supply: Designated UV Stepless Dimming Power Supply
• Belt Width: 550mm
• Conveyor Belt Material: Stainless Steel Chain Plate
• Transfer Speed: Adjustable 1~8m/Min
• Power: 6kw
• Cooling Way: Fan Cooling
• Cabinet Color: Bright Silver
• Power Wiring: Three-Phase 380VAC 50Hz
• Feed End Length: 450mm
• Discharge End Length: 500mm
• High Inlet and Outlet: 250mm
• UV Furnace Length: 1000mm
• Transport Package: Wooden Case
• Specification: 2000mm*800mm*1600mm
• Trademark: UVTANG
• Origin: China
• HS Code: 8543709990
• Production Capacity: 5sets/Week

Product Description

Can be customized according to customer needs!!

Product introduction

The principle of UV curing is that ultraviolet rays are irradiated with special glue to cause polymerization of the glue to solidify.Different sizes of cured articles require different sizes of curing machines.Portable style, desktop case style, hanging style for industrial production, and large curing machine for large items.The speed adjustment drive keeps the speed of the conveyor belt uniform under different loads of UV machine.The UV machine is equipped with a high-intensity light source.



Technical Parameters

Brand	LDTANG	Power wiring	Three-phase 380VAC 50HZ
Power	6KW	Box material	Combined sheet metal
Conveyor belt material	Stainless steel chain plate	Cooling way	Fan cooling
Cabinet Color	Bright silver	Lamp warranty period	1000H
UV lamp	6KW380V620mm*1PC	Illuminate width	520mm
Overall machine size	L2000mm*W800mm*H1700mm
Reflector housing	Polished aluminum reflector housing with imported reflective aluminum sheets
UV Lamp Height	The distance between the lamp and the conveyor belt is 50-250mm (adjustable)
Conveyor belt material	650mm	Transfer speed	Adjustable 0~10m/min
Feed end length	450mm	Discharge end length	500mm
UV furnace length	1000mm	High inlet and outlet	250mm
The stand is made of aluminum and can be raised and lowered.Adjustable height:630-880mm.
The height and angle of the distance between the UV lamp and the conveyor belt can be adjusted.The power of the UV lamp is not adjustable.
Control panel:Start switch,Indicator light,Conveyor switch,Fan switch,Temperature digital display,Individual control switch for the lamp,Hour meter
Safety equipment:Leakage circuit breaker detection,Prevention of over-temperature,Fan motor overload protection,Abnormal emergency switch,Control circuit insurance,Power reverse protection

Note:Can be customized according to customer requirements

Applicable industry

This machine is suitable for UV-sensitive coatings, inks, bonding agents, bonding, injection molding or printing surfaces of various materials to cure and dry instantly.

1. Printing: Widely used in screen printing, lithography, letterpress printing, self-adhesive trademarks, metal nameplates, PC, PVC, ABS, PS, acrylic, Trondo, glass, ceramics, electronic parts, single-sided circuit boards, etc.

2. Coating: Bright coating on wood surface,Bright paper,Plastic floor tiles,PU into leather bright,Fiber optic line surface coating.

3. Bonding: Bonding of circuit board CHIP parts,Bonding of various electronic parts and glass,Bonding of liquid crystal film and terminal sealant

Performance characteristics

· easy to operate, one of the batch production models, the selected components are standardized, simple operation and maintenance, low cost;

· excellent UV light source made in China with good stability;

· reasonable circulation exhaust design, lower suction structure, even the thin sheet, will not drift, the cooling effect is good;

· stepless speed regulation is adopted, and the speed can be freely set within the effective range.

Product pictures







Our service

1.Provide pre-sale and after -sale technical consultation.

2.Provide 24 hours consultations technical support after sale.

3.Provide technical support for training technicians.

4.Provide technical consultation and support for mechanical equipment.

5.Provide UV equipment configuration improvement , installation proposal technical support.

6.In general, door-to-door service is not supported.If door-to-door service is required, a round-trip fee for personnel is required.

7.Normal use of the machine quality problems limited free warranty for 1 to 5 years, lifelong maintenance services, parts of the parts of the supplier to provide free on-site service.