Can be customized according to customer needs!!
Product introduction
The principle of UV curing is that ultraviolet rays are irradiated with special glue to cause polymerization of the glue to solidify.Different sizes of cured articles require different sizes of curing machines.Portable style, desktop case style, hanging style for industrial production, and large curing machine for large items.The speed adjustment drive keeps the speed of the conveyor belt uniform under different loads of UV machine.The UV machine is equipped with a high-intensity light source.
Technical Parameters
| Product name |
UV curing machine for OCA optical glue |
Product model |
LDUVJ-4D-25KW |
| Size |
L1800mm*W1600mm*H1650mm |
Power requriements |
Treen-phase five-wire 380VAC 50Hz |
| Machine power |
25km |
Conveyor belt width |
600mm |
| Transfer speed |
0.5 - 5 m/min |
Main belt material |
Teflon |
| Light source configuration |
LED lamp and Mercury lamp |
Main peak wavelength |
365nm |
| Power regualation |
20% - 100% power |
Typical application |
Transparent device bonding, display bonding curing, UV glue curing and drying, OCA optical glue curing, etc. |
Note:Can be customized according to customer requirements.
Performance characteristics
· easy to operate, one of the batch production models, the selected components are standardized, simple operation and maintenance, low cost;
· excellent UV light source made in China with good stability;
· reasonable circulation exhaust design, lower suction structure, even the thin sheet, will not drift, the cooling effect is good;
· stepless speed regulation is adopted, and the speed can be freely set within the effective range.
Product advantages
LED UV curing machine is mercury free, ozone free, green, environmental protection, is the best alternative to the traditional UV light source.
The cold light source of LED UV curing machine has no thermal radiation, and the surface temperature of the carrier is low, which completely solves the problem of thermal damage that has existed for a long time in light and liquid crystal production.Especially suitable for liquid crystal edge sealing, film printing and other low temperature requirements.
LED UV curing machine without preheating, instantly lit up, instantly reach 100% power UV output.
LED UV curing machine has high energy, stable light output, uniform spot and improved quality.
The service life of LED UV curing machine is more than 10 times that of traditional UV curing machine, about 20,000-25,000 hours.
LED UV curing machine is simple and easy to integrate and customizable.
LED UV curing machine service life is not affected by the number of switches.
Product pictures
Our service
|
1.Provide pre-sale and after -sale technical consultation.
2.Provide 24 hours consultations technical support after sale.
3.Provide technical support for training technicians.
4.Provide technical consultation and support for mechanical equipment.
5.Provide UV equipment configuration improvement , installation proposal technical support.
6.In general, door-to-door service is not supported.If door-to-door service is required, a round-trip fee for personnel is required.
7.Normal use of the machine quality problems limited free warranty for 1 to 5 years, lifelong maintenance services, parts of the parts of the supplier to provide free on-site service.
|
){kind=link}