Electroacoustic Components UV Curing Machine

• Power Supply: Three-Phase 380V
• Total Power: Three Sets of Lights
• Lamp Parameters: 6kw*3PC
• UV Main Peak Length: 365nm
• Mesh Belt Width: 600mm
• Effective Illumination Surface: 450mm
• Model NO.: LD15603550T600
• Irradiation Distance: 50mm(Not Adjustable)
• High Imported Material: 300mm
• Transfer Speed: 0.5-7m/Min
• Cabinet Color: Milky
• Weight: 280kg
• Transport Package: Wooden Case
• Specification: 2400mm*900mm*2150mm
• Trademark: LANDUN
• Origin: China
• HS Code: 8543709990
• Production Capacity: 7sets/Week

Product Description

Can be customized according to customer needs!!

Product introduction

The principle of UV curing is that ultraviolet rays are irradiated with special glue to cause polymerization of the glue to solidify. Different sizes of cured articles require different sizes of curing machines.Portable style, desktop case style, hanging style for industrial production, and large curing machine for large items.The speed adjustment drive keeps the speed of the conveyor belt uniform under different loads of UV machine.The UV machine is equipped with a high-intensity light source.




Parameter list

Project name	Technical Specification	Brand
Application	solidify	landun
Type	Uv lamp Conveyor machine
Model	LD15603550T600
Major configurations
Wavelength	365nm
Uv lamp total lenth	550mm
Uv lamp curing lenth	450mm
Max thickness of cured	Curing products are recommended within 400mm
Uv lamp power	5.6kw * 3 lamps
UV lamp installation location	At the top, ultraviolet light shines down
Control UV lamp mode	1)UV transformer and UV capacitor,50HZ  380V 2)UV lamp power strong light, low light adjustable 3)UV lamp is controlled separately
lamphose	Aluminum curved lamp shade plus imported reflector Lamp bracket up and down distance, Angle can be adjusted
structure of equipment
Machine outside size	L2400*W900*H12150mm
Feeding width	600mm
Belt width	600mm
Conveyor Material	Stainless Steel Mesh Belt or Teflon Mesh Belt (can choose)
Product height	0-200mm   (Adjustable )
Curing furnace length	900mm
Inlet and outlet length	450mm
Uv blocking length	300mm
conveying speed	0.1 to 7M/min   (stepless  Adjustable )
Conveyor height	1)The conveyor belt is designed to be 750 mm above the ground 2)Plastic cup with brake casters.
Control system
Operating mode	Manual operation
Input voltage	380V  50/60HZ
Cooling way	Air
Packing
Packing	Wooden box package
Weight	About  340kg
Warranty	1 years

Note:Can be customized according to customer requirements

Application example

Specially used for uv curing of electroacoustic components, such as loudspeaker, receiver, speaker, microphone, hands-free headset, vibration motor, EL, LENS... UV adhesive curing application.

Typical characteristics

It is one of the preferred products of electroacoustic component manufacturers, with excellent cost performance.

It USES high-intensity ultraviolet light source configuration, combined with UV cold mirror, IR filter optical lens and other optical technology to process the heat produced in the process of ultraviolet radiation for scientific treatment, to achieve high ultraviolet energy, low temperature effect, to overcome the loss of product deformation.

Usually, the magnetic property of electroacoustic components will decrease or even lose its magnetic property after reaching a certain temperature. This model can completely ensure the device to be cured at the same time at a low temperature, so as to avoid losing or reducing its magnetic property, thus improving the product qualification rate and reducing the cost.


Product advantages

The machine has beautiful appearance, light weight, space saving, wide application, reliable quality, safe use, convenient operation, etc.The high-quality high-efficiency lamp is used, and the lamp room is forced to exhaust heat to extend the service life of the lamp and protect the dry items from heat deformation. Optional quartz filter for cooling.

Product pictures






Our service
 

1.Provide pre-sale and after -sale technical consultation.

2.Provide 24 hours consultations technical support after sale.

3.Provide technical support for training technicians.

4.Provide technical consultation and support for mechanical equipment.

5.Provide UV equipment configuration improvement , installation proposal technical support.

6.In general, door-to-door service is not supported. If door-to-door service is required, a round-trip fee for personnel is required.

7.Normal use of the machine quality problems limited free warranty for 1 to 5 years, lifelong maintenance services, parts of the parts of the supplier to provide free on-site service.